Patt rotary screen changer for polymer melt filtration
Polymer melt filtration

Filter 50% more and reduce labour costs with Patt's patented filter.

Patt has developed and produced over 500 filters in 40+ years in the polymer industry.

Custom built for every lineDesigned and built in Montreal, Quebec20+ patents

Trusted by processors and resin producers

Indiana Cardinal logoPlastipak logoIndiana Cardinal logoPlastipak logo
Why your company will love a Patt filter

Zero stops, no pressure spikes, no lost product – increased revenue.

01

More material filtered

On average, 50% more material is filtered than with other filter solutions on the market.

02

Built to last

A Patt filter lasts 30+ years on average when it is maintained.

03

20-second screen changes

Screens change in about 20 seconds without stopping the line. Backflushing takes no extra time.

04

Lower labour cost

Filter settings are automated and tuned through 24/7 data analysis.

05

Safe for operators

Operator-friendly, built safe, with continuous melt flow.

06

Fits every line

Each filter is custom made for your system, then installed and set up by Patt experts, who also train your team.

How it works

Screen changes without stopping the line.

Screens sit in a rotating disc. A clean screen turns into the flow while the line keeps running.

Products

Built to custom size for your production line.

Every Patt filter is fitted to the extruder it serves, with adapters made for your flanges and a screen pack matched to your polymer.

B-sizePatt B-size rotary screen changer

B-Size Patt Filter

The compact frame. A continuous melt filter with precision-ground sealing surfaces and a short residence time that protects the polymer.

Custom fitLeak-freeBackflush ready100% uptime
C-sizePatt C-size rotary screen changer

C-Size Patt Filter

The larger frame, for higher-output lines. Same rotating screen disc, same leak-free sealing, sized to your extruder.

Custom fitLeak-freeBackflush ready100% uptime
Revenue

How a Patt filter increases your revenue.

More output, less scrap and no stops for screen changes.

Rapid CapEx payback
12–24 months.

Typical investment payback, through recovered line downtime, reduced scrap and increased flow.

Maximum plant throughput and zero line downtime

  • Easy screen pack changes keep extrusion lines running non-stop.
  • No need to shut down or slow production shifts for manual filter swaps.
  • Zero pressure spikes and uninterrupted melt flow during screen changes.
  • Film, sheet and pipe thickness stays 100% consistent.
Up to 5%

High contaminant capacity

Handles impurity loads of up to 5%. Loads above 0.1% use backflushing or a scraper-style system.

Zero

Polymer degradation

A short residence time prevents thermal burning, with optimized rheology and flow paths.

Leak-free

Execution

Precision-ground sealing surfaces keep the melt where it belongs.

Comparison

Patt Filter System vs Standard Slide Plate.

A slide plate slows or stops the line at every screen change. A Patt filter keeps it running.

Best choicePatt Filter System
Standard slide plate
Pressure stability
100% constant pressure
Severe pressure drops
Line interruption
Zero process stops
Frequent line slowdowns
PCR contaminant limit
High contaminant load (> 3%)
Low tolerance (< 0.5%)
Manual labour required
Minimal
High
Screen change
About 20 seconds, line keeps running
Line slows or stops

Every screen change on a slide plate costs you output. With Patt, it costs nothing.

Book Discovery Call
Applications

Some of the products and applications our filters are used for.

From recycled post-consumer material to precision pipe, the filter is matched to your resin, melt temperature and throughput.

01

Plastics recycling and PCR

Filters heavily contaminated post-consumer pellets with zero downtime.

02

Blown film and sheet

Eliminates gauge bands, gel defects and bubble breaks.

03

Compounding and masterbatch

Handles high filler loads such as calcium carbonate, titanium dioxide and glass fibre.

04

Pipe, profile and tubing

Maintains uniform wall thickness under continuous extrusion.

Blueprint

Your new Patt filter starts with drawings of your existing production line.

Each filter is drawn around your line and flanges, then built to fit.

Patt Gen IV touch-screen controller showing inlet, outlet and delta melt pressure
Patt controller

Touch controller – to maximize profits.

Monitor pressure, change screens and troubleshoot from a single screen at the filter.

01

Easy monitoring

Inlet, outlet and delta pressure, air pressure and screen count on one screen.

02

Safety for employees

The line shuts down automatically if a problem occurs.

03

Protects equipment

Early warnings and alarms help prevent equipment failure.

04

Simple troubleshooting

Alarms, logs and trend graphs show what happened and when.

05

Optimized settings

Filter settings tuned for ideal performance and maximum filtration.

06

Lower screen costs

Optimized screen changes keep screen costs down.

Free audit

Let us calculate how much you would increase volume and save by changing to a Patt filter and screens.

What we need to give you an estimate of your increased revenue. Have it ready for the call, and leave out anything you are not sure of.

01Polymer and melt profile

  • Polymer / resin typee.g. HDPE, LDPE, PP, PET, PS
  • Melt temperatureOperating temperature at the filter, °C or °F
  • Viscosity / melt flow index (MFI)Viscosity rating under processing shear rate

02Extrusion line requirements

  • Target throughput / output rateDesired production flow rate
  • Extruder line diameter / sizeScrew diameter and pressure rating
  • Maximum allowable pressure dropTarget bar / PSI differential across the filter screen

03Filtration and contamination specs

  • Filtration fineness / mesh sizeDesired micron rating or mesh size, e.g. 50 µm, 100 µm, 200 mesh
  • Contaminant typeGels, post-consumer PCR scrap, fillers like glass fibre
  • Contaminant level (%)Estimated contamination load percentage

There is no polymer we cannot filter. Book a call with our engineering team and we will run the numbers for your line.

Get your free audit
Purchase process

The buying process.

Four steps from the first call to a filter running on your line.

1
Step 1

Book a call

Talk to our sales team about your line, polymer and throughput.

Book Discovery Call
2
Step 2

Send your drawings

A line drawing of your current extrusion line and flange drawings, so we can see where the bolts attach.

3
Step 3

Review the proposal

We send a filter proposal with adapters to fit your line, together with the price. Ask for changes until you are satisfied.

4
Step 4

Installation and training

We schedule installation and train your operators on site.

Payment terms

50%down payment
35%before shipping
15%within 30 days after installation
Support plan

Patt Total Care

A yearly care plan that keeps your filter running at its best, with screens, parts, training and data from the team that built it.

90% fewer

production line shutdowns for clients with Patt Total Care.

01Support by phone and email
02The ideal screen pack for your filter, delivered monthly or quarterly
03Bolts, recommended to be changed every 3–5 years to maintain performance
04Yearly on-site training for new staff
05Data analysis with suggestions and reports, as often as you need
06Bolt changes with light refurbishment of the filter when needed
Price · Starting from$17,500 annually
Billed quarterly
About us

Patt Technologies

A family-owned producer of polymer melt filters, combining German engineering with Canadian production in Montreal, Quebec.

Patt production floor in Montreal, QuebecOur production floor in Montreal, Quebec
40Years producing filters
20+Patents
MontrealCanadian produced in Quebec
GermanEngineering
FamilyOwned

Industries we serve

AerospaceDefenceOil & gasAutomotive

Polymers we filter

HDPELDPEPPPETPSFilled compounds

Let's talk about your extrusion line.

Tell us your polymer, throughput and contamination. An engineer will get back to you with a proposal.

Book Discovery Call sales@patt-tech.com
Head officeMontreal, Quebec, Canada
ProductsRotary screen changers · Gen IV controller
© 2026 Patt SolutionsPolymer melt filtration